Zen Poultry And Farming Hvac Equipments

Frame, frames are made of galvanized board,  Blade, 6 pieces of blades and all the blades are made by 430/201/304 stainless steel, mirror face, impeller, hub, casting aluminum alloy impeller.  Bearing of impeller, permanently seals bearing,  Venture, galvanized board, thickness 1.0mm.  Intel wind protecting net, spraying paint steel wire, thickness 2.8mm.  Electrical motor, national-grade aluminum alloy frame motor, 380V, 50Hz, 3-Phase/1- Phase, 4-Pole,  1450 RPM, Ip55, class F, efficiency 90%, top/foot mounted, (motor can be supplied as demand  Belt Driven with best quality & belt  Shutters, galvanized board, 0.8mm thickness while the middle  Opening system, Push-Pull / Centrifugal / hammer opening system,  Rivets, aluminum alloy and stainless steel rivets,  Cable, 1 meter long.

Additional Information:

• Production Capacity: 100
• Delivery Time: 3-4
• Packaging Details: Pallet packing wooden box packing

Features

• Easy installation
• Hassle-free performance
• Low energy consumption
• Low maintenance cost.

Additional Information:

• Production Capacity: 1000 Set/Sets per Month
• Delivery Time: 4-5 days
• Packaging Details: Wooden packing

Heavy hammer exhaust fan  mainly composed of blades,motor,frame,protecting nets ,supporting frames and shutters.The motor drive blades to cause air flow and shutters can open and close automatically to prevent the dust from entering.The major parts are made of galvanized  steel sheets and stainless steel sheets.

Bearing : Fan bearing :adopts imported double-row bearing with special waterproof design,water can't enter.
Advantage:High strength,lower noise,maintenance free and long service life.

SSfan blades : 
Advantage: Large air flow, no deformation, no fracture, no dust, attractive and durable.

Belt : Long service life and no repair

Motor : 
Advantage: Pure copper wire,High-efficiency,Energy-saving.

Hammer system : 
Advantage:1.No electricity ventilation,Pull ring for assistance the Heavy Hammer2.It can keep the shutters open at complete 90 degree to ensure the lowest air resistance and biggest air volume.

Fan belt pulley : 
Advantage: Small wind resistance,Large air flow, attractive and durable.

Frame : 
Advantage:High strength,Strong corrosion resistance

Additional Information:

• Production Capacity: 10000 Set/Sets per Month
• Delivery Time: 4-5 days

Features

• Easy installation
• Hassle-free performance
• Low energy consumption
• Low maintenance cost.
• Energy efficient solution
• High airflow capacity

Additional Information:

• Production Capacity: 1000 Set/Sets per Month
• Delivery Time: 4-5 days
• Packaging Details: foil and pallet packing

•  Exhaust fan is also called negative pressure exhaust fan. It's an axial fan. Mainly used for ventilation and temperature cooling.  •  Simple structure, easy to maintenance and install •  Drop the Automatic shutter open and close. •  Low noise and large airflow •  Long service life  •  Can be widely used for the place 

Additional Information:

• Production Capacity: 100
• Delivery Time: 4-5 days
• Packaging Details: pallet packing corrugated box packing foil wrap

The fan is mainly composed of blades, belt pulley and flange, blade hub, belt, bearing, blade support, shutters, frame, protection mesh, motor and other components. The motor drives the blades to generate airflow. To prevent outdoor dust and foreign matter from entering, and to avoid the effects of rain, snow and wind.


 cone fan - 

• Reasonable cone designing,low noise,big air flow,low operating cost .
• Imported bearing ,high-strength,low noise,durable.
• High-strength alumimum-magnesium alloy wheel ,light weight,high strength,toughness good.
• stainless steel blades,no distortion,aesthetic durability .

Additional Information:

• Production Capacity: 100 Piece/Pieces per Day
• Delivery Time: Within 4-5 working days
• Packaging Details: Carton Packaging

Exhaust fan 480*480*320mmBlade Diameter: 380mmStainless Steel 430, thickness 1.0mm, 4 pcsMotor: Nosch 0.18kw, 220v, single phaseShutter: Galvanise steel, 0.40-0.45mmAirflow: 3000cbm/h

Additional Information:

• Production Capacity: 100
• Delivery Time: 4-5 days
• Packaging Details: pallet packing, wooden box p[acking

Direct drive fan 1380*1380*400mmBlade Diameter: 1250 mmStainless Steel 430 1.2 mm275gsm Up frame 1.00mm & others 0.8mmmotor: 1.1kw, 380v, Three phase, ip 55, 100% copper wire

Additional Information:

• Production Capacity: 100
• Delivery Time: 4-5 days
• Packaging Details: pallet packing wooden box packing

Direct Drive Hammer Fan 1000*1000*400mmBlade Diameter: 900mmStainless Steel 430 1.2mmup frame 1.00mm & others 0.8mm, zinc coating 275g/m2Motor: Shunbao 0.55kw, 380v, Three phaseShutter: galvanize Stell 0.40-0.45mmWind collector: Galvanize 0.8mmBelt: Type BAirflow: 30000 cbm/H

Additional Information:

• Production Capacity: 100
• Delivery Time: 4-5 days
• Packaging Details: pallet packing, wooden box packing

Features

• Easy installation
• Hassle-free performance
• Low energy consumption
• Low maintenance cost.
• Energy efficient solution
• High airflow capacity

Additional Information:

• Production Capacity: 1000 Set/Sets per Month
• Delivery Time: 4-5 days

Hammer fan 600*600*400mmBlade Diameter: 580mmStainless Stell: 430 1.0mmAll frame 0.8mm, zinc coating 275g/m2Motor: Nosch 0.37kw, 220v, single phaseShutter: galvanize steel, 0.40-0.45mm,Wind collector: galvinize 0.8mmAirflow: 9500 cbm/H

Additional Information:

• Production Capacity: 100
• Delivery Time: 4-5 days
• Packaging Details: pallet packing, wooden box packing

The exhaust fan produced by our company can be used for ventilation and cooling in summer in large farms. Different exhaust fans are applicable to different scenarios. In the farms with more corrosive gases, our nylon blade blower has the advantages of large air volume, corrosion resistance, low temperature resistance and so on. The above is the usage of part of our cooperative customers.

Fan Blade - Optional red nylon fan blade, the fan blade is stronger, more corrosion resistant, fan blade Angle is larger, more exhaust air volume.

Motor : copper coil motor, with high precision bearing, strong power, low noise, stable operation

Casting aluminum transmission wheel and special push and pull mechanism, strong power, durable, push and pull mechanism, open quickly, stable operation.

Specially designed push and pull mechanism, the machine runs stably, the louvers open and close quickly.

Product application  : It used in Agriculture and industry ventilation and cooling. It is mainly used for animal husbandry, poultry house, livestock breeding, greenhouse, factory workshop, textile etc.

Additional Information:

• Production Capacity: 1000 Set/Sets per Month
• Delivery Time: 3-5 days after payment process.

Heavy hammer exhaust fan  mainly composed of blades,motor,frame,protecting nets ,supporting frames and shutters.The motor drive blades to cause air flow and shutters can open and close automatically to prevent the dust from entering.The major parts are made of galvanized  steel sheets and stainless steel sheets.

Bearing : Fan bearing :adopts imported double-row bearing with special waterproof design,water can't enter.
Advantage:High strength,lower noise,maintenance free and long service life.

SSfan blades : 
Advantage: Large air flow, no deformation, no fracture, no dust, attractive and durable.

Belt : Long service life and no repair

Motor : 
Advantage: Pure copper wire,High-efficiency,Energy-saving.

Hammer system : 
Advantage:1.No electricity ventilation,Pull ring for assistance the Heavy Hammer2.It can keep the shutters open at complete 90 degree to ensure the lowest air resistance and biggest air volume.

Fan belt pulley : 
Advantage: Small wind resistance,Large air flow, attractive and durable.

Frame : 
Advantage:High strength,Strong corrosion resistance

Additional Information:

• Production Capacity: 10000 Set/Sets per Month
• Delivery Time: 4-5 days

In a direct drive fan, by definition the impeller is directly connected to the motor shaft. There are no power transmission losses the energy that the electric motor develops is transmitted directly to the impeller, which passes into the airflow and pressure development

Additional Information:

• Production Capacity: 100
• Packaging Details: Foil and Pallet Packing

Direct Drive Hammer fan 800*800*400mmBlade Diameter: 750mmstainless steel: 430 1.0mmAll frame 0.8mm, zinc coating 275g/m2Moto: Shunbao 0.37 kw, 220v single phaseShutter: galvinized steel, 0.40-0.45mmWind collector: Galvinizes 0-8mmAirflow: 22000 cbm/H

Additional Information:

• Production Capacity: 100
• Delivery Time: 4-5 days
• Packaging Details: Pallet packing, wooden box packing

Features

• Easy installation
• Hassle-free performance
• Low energy consumption
• Low maintenance cost.

Additional Information:

• Production Capacity: 1000 Set/Sets per Month
• Delivery Time: 4-5 days